Issue link: http://alpine.uberflip.com/i/577795
6 AutoMill HP ™ P R O D U C T M A N U A L EN 1.2.2 Equipment Specifications 5 Head, High Performance Component Saw Saw Blade Head 1 20 in. Carbide Tipped Head 2 18 in. Carbide Tipped Head 3 18 in. Carbide Tipped Head 4 18 in. Carbide Tipped Head 5 32 in. Carbide Tipped Motor RPM Head 1 3450 Head 2 3450 Head 3 3450 Head 4 3450 Head 5 1725 Tolerances Heads: Height In-Out Angles ±0.02 in. ±0.02 in. ±0.02 deg. Hold Downs: Up-Down In-Out ±0.06 in. ±0.06 in. Material Conveyors: In-Out ±0.06 in. Length ±0.02 in. Lumber Stop ±0.02 in. Controller PC Monitor Communications Industrial PC w/ Windows 7 Operating System 17 in. Flat Panel (Touch-Screen Optional) Ethernet Operating Temperature 32° to 104° F (0° to 40° C) Humidity 10-95%, non-condensing Max Altitude 6500 ft. Shipping Weight 18,000 lbs. Foundation Requirements ≥4" Thick Voltage Draw, Standard: Optional Optional Optional 480 VAC 240 VAC 208 VAC 600 VAC 100 A 200 A 200 A 80 A 3 PH 3 PH 3 PH 3 PH 60 Hz 60 Hz 60 Hz 60 Hz Air Draw 69 SCFM @ 90 PSI NOTE All calculations are based on the 2014 NEC and all other directly and indirectly implied articles and tables. All sizing of feeder short circuit and ground fault protection should be performed by a competent, licensed electrician. Supply adequate amperage for 208,240, 380 & 575 VAC is based on the use of a supplied 75 KVA transformer.