Issue link: http://alpine.uberflip.com/i/577795
16 AutoMill HP ™ P R O D U C T M A N U A L EN 5. Collection Path (source) – Database logging location for date information. This location can be shared across the plant network for information access. 6. Copy Path (destination) – Temporary storage location for job related information. 3.5.4. Timers Figure 23 1. After Cut Delay (Sec) – Click or touch the box to set the delay time between setups. 2. Setup Timeout (Sec) – Click or touch the box to set the time the saw will try to setup before displaying an error message. 3. Brake Release Delay (Sec) – Click or touch the box to set the time the brakes will engage on the saw blades. NOTE Alpine recommends setting Brake Release Delay (Sec) to 5-7. 3.5.5. Print Figure 24 1. Printer Configuration – Open the menu to configure the Label Maker Printer (optional). Figure 25 On the screen shown in Figure 25, select the information to print on the label. Then click or touch SAVE. 3.6. Sawyer Login Menu Figure 26 NOTE If the Sawyer Login is selected in the Options (Section 3.5.2), it will appear before the Main Menu (Figure 5) appears. 1. ADD – Click or touch to add a new sawyer to the list. • Use the virtual keyboard (Figure 27) to enter the name. Figure 27 2. REMOVE – Select a sawyer name then click or touch REMOVE to delete them from the list. 3. CANCEL – Click or touch to return to the Sawyer Login Menu. 4. LOGIN – Login as the selected sawyer and advance to the Main Menu.