Issue link: http://alpine.uberflip.com/i/624193
30 FloorMaster P R O D U C T M A N U A L EN Appendix A – Maintenance Intervals FloorMaster Machine Inspection Guide and Maintenance Log Date _____/_____/_____ DAILY / 8 HOURS (SECTION 5.1) Mon Tue Wed Thur Fri Sat Sun Check limit switches and safety bars Clean the gantry track Clean table top of nails, connector plates and other debris Drain water from air filter unit Clean safety scanner lenses MONTHLY / 160 HOURS (SECTION 5.2) Check the roller chain drive tension Lubricate the drive chain Inspect track for grease build up Check load runners QUARTERLY / 480 HOURS (SECTION 5.3) Grease gantry head bearings Oil lift-out and flip over pivot points SEMI-ANNUALLY / 800 HOURS (SECTION 5.4) Check jam nuts on table legs Check entire machine for missing or loose hardware Lubricate the drive chain Check gear box fluid level — P L E A S E M A K E P H O T O CO P I E S O F T H I S F O R M F O R LO G G I N G M A I N T E N A N C E —