Issue link: http://alpine.uberflip.com/i/624193
29 FloorMaster P R O D U C T M A N U A L EN 6. Remove the 2 screws that attach the memory module to the display unit (Figure 48). Memory module Figure 48 7. Take the old system memory module that was removed in Step #6, and install it into the new display unit (Figure 49). Old memory module New display unit Figure 49 8. Replace the mounting bracket, power cable, and communications cable that were removed in steps 3-5 (Figure 50). Figure 50 9. Fasten the mounting bracket to the back panel mount inside the electrical enclosure (Figure 51). Figure 51 10. Close and latch the door to the enclosure and power up the FloorMaster. 11. Replacing the display unit is complete.