Issue link: http://alpine.uberflip.com/i/624193
7 FloorMaster P R O D U C T M A N U A L EN 1.2. General Specifications 1.2.1. Machine Capacity Truss Depth 12 in. – 24 in. (0.3 m – 0.6 m) Truss Length Up to 40 ft. (12 m) Truss Thickness Up to 3.5 in. (0.025 m) NOTE The standard model consists of up to two stations and two modes of operation for truss fabrication. Group mode is for long trusses, up to 40'. And a single mode separates the controls into two stations for trusses up to 19' per station (Section 2.3.1.). 1.2.2. Equipment Specification Overall Length 64 ft. (19.5 m) Overall Height 11 ft. 4 in. (3.5 m) Overall Width 10 ft. 6 in. (3.2 m) Table Length 40 ft. (12.2 m) Table Height 2 ft. 6 in. (0.8 m) Table Width 6 ft. 8 in. (2 m) Roller Diameter 24 in. (0.61 m) Air System ½ in. N.P.T., 15 CFM @ 120 psi Figure 1 – FloorMaster Foot Print 1.2.3. Electrical Service Requirement Standard: Power 480V, 3ø, 60 Hz, 12A Motor Speed 1750 rpm Gear Ratio 18.7:1 Sprockets Tooth 14 & 52 Gantry Speed 158 ft./m (0.8 m/s) NOTE Requires 30 Amp Max Short Circuit Protection Device. Optional: Power 415V, 3ø, 50 Hz, 14A Motor Speed 1460 rpm Gear Ratio 18.7:1 Sprockets Tooth 15 & 52 Traveling Head Speed 141 ft./m (0.72 m/s) NOTE Requires 30 Amp Max Short Circuit Protection Device.