Issue link: http://alpine.uberflip.com/i/1399321
64 ALS 4.0 XE P R O D U C T M A N U A L EN 5.7.3 Small Parts Conveyor NOTE The belt used on the small parts conveyor features a self-tracking belt and does not track off of guide rollers. This offers a simplified process for belt replacement and tracking as detailed in the following steps. Step 1 – Ensure tail pulleys are free of debris. Step 2 – Square tail pulleys by making slight adjustments to the tension blocks (Figure 180). Figure 180 Step 3 – Run for 15 minutes to ensure belt is tracking correctly. NOTE Perform this process on both ends of the belt.