Alpine Equipment Manuals

M1026-R1_Alpine-ALS 4.0 XE__EN

Issue link: http://alpine.uberflip.com/i/1399321

Contents of this Issue

Navigation

Page 12 of 79

13 ALS 4.0 XE P R O D U C T M A N U A L EN Figure 9 3.2.2 Current Stock Length Menu This screen is only available if running single stock option and without Auto- Infeed. This screen allows you to select the stock length the user want to use. Touch the white area inside the box to bring the screen up. Select the desired length of stock by checking the small box next to the length. NOTE There is no EXIT button for this screen. Selecting any board length from lumber list will exit this screen. 3.2.3 Utility Tools Click on the utility tool icon and the following menu screen will appear: Figure 10 1. MARK PIECE CUT – Will mark the piece you have selected as completely cut. The piece will turn red. Be sure you have selected the piece you want to mark before touching this button. 2. RESTORE PIECE – Removes any stored cut information for the selected piece restoring it to uncut status. 3. MARK JOB CUT – Will mark the job you have selected as completely cut. Be sure you have selected the job you want to mark before touching this button. 4. RESTORE JOB – Removes cut information for the selected job restoring it to uncut status. 5. RESTORE PARTIAL PIECES – Restores Partial pieces. 6. CHANGE PIECE QUANTITY – Allows you to change the quantity of the selected piece. When you touch this button, another screen will pop up. If the selected piece is used in more than one location, you will need to choose the one you want to change. When that is done, a screen will appear that will allow you to set the quantity for that piece to whatever you need. 7. ADD TO STANDARD PIECES – Will automatically add the selected piece to the list of Standard Pieces. See 4.4.1.6 for a discussion of Standard Pieces. 8. DELETE PIECE – Deletes the selected piece 9. MERGE JOB – Merges two or more jobs in to one job. 10. CHANGE LENGTH – Allows user to change the selected piece length. 11. CANCEL – Will cancel out of this screen and leave all cut data intact.

Articles in this issue

view archives of Alpine Equipment Manuals - M1026-R1_Alpine-ALS 4.0 XE__EN