Issue link: http://alpine.uberflip.com/i/711591
23 SpeedSet P R O D U C T M A N U A L EN 3.6.2. Individual Control There is a list of all the pucks on the left hand side of the repair tab. Touch the puck name to select that puck for individual control. In the software each puck is connected to one of these types of controls. Normally, they are automatically driven, but they can all be controlled individually and manually for debugging specific problems. Figure 12 Individual Control ! CAUTION Many of the safety and protection functions are not available when operating manually. You are responsible for controlling the puck safely and correctly. Table 12 Individual Control Description Title (Refer to Figure 12) Picture Description 1. Name The name of the movement. 2. Scroll Click and drag scroll area to move puck to a new location. 3. Next Position The position that the movement is being told to go to next. 4. Current Position The actual position of the movement at all times. 5. Status Tells the status of the movement, including any error condition. 6. Minimum The minimum position that the movement can be at. 7. Calibration Click to open the axis calibration screen. This is for tech support use only. 8. Jog – Moves the position by 1/16'' down. 9. Jog + Moves the position by 1/16'' sixteenth up. 10. Go/Stop Moves the puck to the position and stops it. 11. Maximum The maximum position the movement can move.