Issue link: http://alpine.uberflip.com/i/985331
4 AutoMill SC Motion Control Upgrade P R O D U C T M A N U A L EN AREA Tells where hazards may occur. HAZARD Tells what the hazard is. SAFEGUARDS Tells how to avoid the hazard. Maintain a Clean Work Area A cluttered/dirty workspace could cause injury to personnel and equipment. Regularly clean work areas to ensure a safe working environment for yourself and those around you. Clean machines as directed in product manuals to maintain safe operational conditions and peak equipment performance. Automated Equipment With automatic equipment, the hazard of an unannounced startup is present. Make sure equipment is shut down properly, turning off power and air to machines before performing any service. Lockout Tagout Always perform OSHA lock-out, tag-out when servicing equipment. This includes power and air. De-energize and de-pressurize all systems that hold current or air pressure. Turn off electric power at the breaker. Turn off air pressure. IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE OPERATOR OF THE EQUIPMENT. ADDITIONAL COPIES ARE AVAILABLE, CALL ALPINE EQUIPMENT CUSTOMER SERVICE: 800-521-9790. For more information, see Alpine Manual M1002—"Equipment Safety Precautions". Additional copies of the safety procedures can be ordered by calling 800-521-9790. EQUIPMENT DESCRIPTION Eye Protection While operating any Alpine Equipment, safety glasses are required to be worn. Cutting equipment creates sawdust, which can end up in your eyes if you are not protected. Be aware of the possibility of flying debris. See ANSI Standard 287.1-2010 for specifications on safety eyewear. Safety Shoes Wearing safety shoes will help prevent toe and foot injuries. Nail plates are commonplace in truss manufacturing facilities. Wearing safety shoes can protect your feet if you a step on a nail plate. EQUIPMENT DESCRIPTION Wear Gloves To avoid splinters, employees handling wood products should wear protective gloves. Electrical components and moving parts become hot during normal operating conditions. Be cautious and wear insulated gloves when working with these components. See ANSI Standard 105-2011 for specifications on hand protection. Hearing Protection When operating equipment, wear hearing protection. See OSHA Standard 1910.95 for clarification on hearing protection. Recommended Personal Protective Equipment