Issue link: http://alpine.uberflip.com/i/985331
20 AutoMill SC Motion Control Upgrade P R O D U C T M A N U A L EN Figure 29 1. RESTORE FILE – Restore the job file as uncut (remove all red indicators). 2. RESTORE PIECE – Remove any stored cut information for the selected piece, and restore it as uncut (remove the red indicator from the selected piece) 3. MARK PIECE CUT – Mark a selected piece as cut (add a red indicator to the piece). 4. TEXT VIEW – View/edit the current TRS file as a text doc. 5. DELETE FILE – Delete the current TRS file. 6. EXIT – Returns the software to the Job Select Menu (Figure 22). 4.3. SEMI Mode Turn the Mode Switch on the Operator Console to SETUP. NOTICE Confirm that the security bypass and length bypass switches are in the OFF position. The saw can crash if these safety features are disabled. Click or touch SEMIMODE on the main menu (Figure 21) to advance to the Board Select Menu. Turn the Mode Switch to RUN to begin cutting. The machine moves into position and the AUTOSTART button appears as show in Figure 27. Click or touch AutoStart to start the saw blades, material conveyor, and refuse system. Figure 27 4.2.1.3. Utility To access the Utility (Figure 29) screen, click on the Utility icon from the Job Select scree (Figure 28). Figure 28