Issue link: http://alpine.uberflip.com/i/985331
17 AutoMill SC Motion Control Upgrade P R O D U C T M A N U A L EN 4.2. Main Menu Refer to Figure 21. 1. AUTOMODE – Automatic saw operation mode. Data is read from the saw computer, USB drive, or network location (Section 4.2.1). 2. SEMIMODE – Semi-automatic saw operation mode. Allows operator entry for cutting data (Section 4.3). Buttons 3-7 make up the Main Menu Toolbar: 3. E-Stop – Indicates if the E-Stop Button press, or E-Stop Perimeter Cable have been pulled. 4. System Status – Opens the System Status Screen (Section 4.3). 5. Calibrate –Opens the Calibration Menu (Section 5.1). 6. Options – Opens the Options Menu (Figure 21). 7. Exit – Closed/Shutdown the AutoMill SC Upgrade program. 4. AutoMill SC Upgrade Software NOTICE This section explains only the new changes to the AutoMill SC software. 4.1. Software Language The operation user interface of the AutoMill SC Motion Control Upgrade is available in three languages English, Spanish and French. Changing from one language to the anther can be done from the Main Menu by selecting inside the box labeled "English". Each time the box is selected it will toggle from one language to the next. The factory default language is English. Contact Technical Support if you want the language to default to another. Figure 21