Issue link: http://alpine.uberflip.com/i/935082
32 AutoSet Plus P R O D U C T M A N U A L EN 7. Pull guide blocks out of the table and set them down (Figure 77) NOTICE The guide blocks are connected and will not pull all the way out. Figure 77 8. Remove motor mounting screws on the opposite end of the table (Figure 78) Figure 78 5. Loosen bearing's set screws (Figure 75) Figure 75 6. Remove bearing plate. Use the ½" square drive to turn the axis and push the plate off, then the plate can be pulled by hand (Figure 76) Figure 76