Issue link: http://alpine.uberflip.com/i/935082
14 AutoSet Plus P R O D U C T M A N U A L EN 2.9. Getting Data to the AutoSet Plus 2.9.1. General Table setup information must be in ASD files format. Most truss engineering software packages can develop these files automatically. Contact the software supplier for details. Alpine will supply the file specification for these files if necessary. 2.9.2. Network An Ethernet adapter card is provided with the computer inside the console. Alpine recommends connecting the network using a Cat 5 Ethernet cable. Except for its distance from the server, the table computer operates like other computers on the network. Distance can be an issue, Alpine recommends that the network cable is installed and connected by a network professional. If ASD files are being sent to the AutoSet Plus over a network connection, it is mandatory that the table computer be able to write to the ASD files to the network. This is how completed setups are recorded. The table will require certain network rights. If the network administrator has questions, have them contact Alpine Equipment Technical Support for more information. To receive live support, the AutoSet Plus computer must have internet access. This will allow for remote access by Alpine Equipment Technical Support for troubleshooting and diagnostic evaluation. 2.9.3. USB Device Sometimes called "jump drives" or "thumb drives", these devices are necessary if the saw is not connected to a network. The AutoSet Plus has a dustproof USB port mounted on the front panel of the operator's console for these devices. The AutoSet Plus program communicates with these devices in the same manner as it would to a hard drive or network connection. 2.10. HMI 4 5 2 1 3 6 1 Monitor Standard or Touch Screen 2 Power/Reset Button Push Button that resets system after E-stop 3 Keyboard 4 Emergency Stop Safety E-stop push button (stops all axis motion) 5 Mouse 6 USB Port