Issue link: http://alpine.uberflip.com/i/935082
42 AutoSet Plus P R O D U C T M A N U A L EN NOTE The number of the drives on the diagnostic software matches the number of the axes on the AutoSet Plus software. Figure 102 Also, the Sercos Topology highlights any issue area on the system. For example, on Figure 103 the system located error 8979 on drive number 6. By clicking on the error code, the user can go directly to the System Diagnostic Screen (Figure 97) without the need to enter the error code manually to diagnose the problem. Figure 103 Figure 100 Below are some of the useful tools that can be accessed from the left tabs panel: 1. HW/SW versions (under System Overview tab) (Figure 101) : Provides quick information about each of the AutoSet Plus motion control components (Drives, controller), such as: • Device types • Serial numbers • Firmware revisions • Hardware version • Controller Type Figure 101 2. Secros Topology: The Sercos Topology provides a graphically based diagnostic. It shows the hardware connections and it identifies any broken connection. Figure 102 shows the connection from the master controller to the system's drives, as well as the connection between the drives and the motors.