Alpine Equipment Manuals

AutoSet Plus Product Manual

Issue link: http://alpine.uberflip.com/i/935082

Contents of this Issue

Navigation

Page 14 of 155

15 AutoSet Plus P R O D U C T M A N U A L EN 3. AutoSet Plus Software ! WARNING Make sure the tabletop is clear of all persons, lumber, jig stops and obstructions before moving the pucks. 3.1. Computer The AutoSet Plus system is equipped with an industrial computer running Windows Embedded Standard. It utilizes an externally accessible CFast SSD card for the primary hard drive. The CFast card gives the advantage of a quick start up time as well as inexpensive and easily replaceable backup copies. 3.1.1. Alpine Industrial Computer Connections on the top of the computer: Connections on the bottom of the computer: Addition of a second monitor to display HMI visuals at a second location: 1- Purchase a USB 3.0 to HDMI graphics adapter. 2- Run an HDMI cable from the monitor to inside the HMI cabinet. 3- Attach the adapter between the HDMI cable and any available USB port. 4- Load the driver for the adapter. 5- Microsoft operating system: In the Control Panel, select the Display program, then Change display settings, then Detect the second monitor and select duplicate (Multiple displays:) to have the same visuals on both monitors. Please contact Alpine Technical Support if you have any questions or issues. 3.2. Software Language AutoSet Plus software is available in three languages English, Spanish and French. Changing from one language to the another can be done from ini setting file located under C:\AUTOSET. To change the software language, follow the steps below: 1- Open the ini setting file located under C:\AUTOSET 2- Find the language line in the ini file (Figure 24) Figure 24 3- Change the number after the equal sign to select the language as following: • For English, Language = 0 • For Spanish, Language = 1 • For French, Language = 2 4- Save and close the ini file

Articles in this issue

view archives of Alpine Equipment Manuals - AutoSet Plus Product Manual