Alpine Equipment Manuals

AutoSet Plus Product Manual

Issue link: http://alpine.uberflip.com/i/935082

Contents of this Issue

Navigation

Page 10 of 143

11 AutoSet Plus P R O D U C T M A N U A L EN 2.6. Power Distribution (Incoming Power) The Power Distribution box (incoming power) includes the following items which are identified by number on Figures 17 - 18: No. Item Description 1 Main Power Distribution Panel Electrical enclosure, type 12,13 Dimensions: 20x20x8 2 Circuit Breakers Each circuit breaker is labeled with one of the following: Gantry Motor - 480VAC, 30A, 60Hz Table Circuits – 480VAC, 20A, 60Hz Controller Box – 480VAC, 20A, 60Hz 3 Incoming Power Customer to supply incoming power by a qualified electrician 4 Distribution Block Rated for 600V, for use with copper or aluminum #2 - #14 AWG 5 Strain Relief ½, and 1 inch 6 Ground Terminal Grounding location for power wires Figure 17 4 3 2 6 5 2 Figure 18 1 2.5. Liftout Safety System The liftout safety system notifies the operators before any liftout movement. The system consists of a horn that creates an audible alarm and a red flashing light, both the horn and light come on before the liftout moves. Each table group has its own liftout safety horn and light. When the gantry operator rotates the group select switch the horn and the light come on, then after a 2 second delay the operator will be able to lift or lower the selected group of liftouts using the joystick (Section 4.2 for gantry operation). The customer is responsible for mounting the horns and red flashing lights. The recommended spot for the horns and lights is above the staging area of the table in each group. The customer is responsible for providing 24v wires and routing them from the horns and lights to the main control box. Installer is responsible for the main control box connections. NOTICE Wire gage needs to be determined based on the length by a qualified electrician to meet NEC standard. The Liftout Safety System includes the following items which are identified by number on Figures 15 - 16: No. Item 1 Horn (24V) 2 Red Flashing Light (24V) 1 Figure 15 2 Figure 16

Articles in this issue

view archives of Alpine Equipment Manuals - AutoSet Plus Product Manual