Alpine Equipment Manuals

RollerPress Product Manual

Issue link:

Contents of this Issue


Page 13 of 83

14 RollerPress P R O D U C T M A N U A L EN 4.2. Loading Trusses Trusses should be fed into the RollerPress at a proper height that allows the trusses to smoothly enter the gap between the rollers. Trusses can be fed into the RollerPress by hand or via an automated conveyor. ! CAUTION Always load the RollerPress from the front side of the machine (the side facing the electrical panel). 4.3. Unloading Trusses Let the machine eject the trusses. Once the truss has cleared the powered rolls, it is safe to move the truss away from the machine. ! WARNING Do not try to pull trusses from the RollerPress. 4.1. Power Control Use the Forward/Reverse switch to choose the rollers' rotation direction. Press the Run button to run the motor Use the E-Stop for emergencies only. ! CAUTION Do not leave the machine unattended where an untrained person may enter the risk area. ! CAUTION Use the REV direction only to remove jammed or misfed trusses (Section 4.4) 4. Operation Figure 12 Electrical Panel

Articles in this issue

view archives of Alpine Equipment Manuals - RollerPress Product Manual