Alpine

Structural Connectors Catalog 2015-2016

Issue link: http://alpine.uberflip.com/i/586848

Contents of this Issue

Navigation

Page 64 of 129

65 (800) 521-9790 alpineitw.com NOTE These items are a sampling of the product which can be converted for steel stud usage. Please contact factory for additional information. ST/CA ST/CAS ST/CAS 50 DESCRIPTION FINISH LOAD #10 x 1" Hex Zinc 330 #10 x 1" Philips Zinc 330 #10 x 1 1 ⁄2" Philips Zinc 330 ST/WA ST/CA 50 ST/WA SCREWS ST/CA ST/CAS CLIP ANCHORS/SKEWED Design Features… the ST/CA and ST/CAS angles are multi-use reinforcing angles and can be field skewed to a maximum of 135°. Material… 18 ga. and 16 ga. galvanized steel. Installation… all specified fasteners must be used to achieve design loads. ST/WA ST/WA14 WALL ANCHORS Design Features… three wall anchor configurations are available for use in steel stud construction. The ST/WA and ST/ WA14 are suited for both retrofit and new construction. Material… 14 ga. and 12 ga. galvanized steel. Installation… all specified fasteners must be used to achieve design loads. SCREWS SCREWS Design Features… most structural hardware items can be converted for use with light gage steel construction. The hole patterns may differ slightly from those products manufactured for use in general wood construction. No.10 screws are general fasteners for steel construction. To achieve stated loads, shear capacity must be equal to or greater than the table value. ST/AD10 ST/AD ST/AD10 PRODUCT CODE DIMENSIONS (INCHES) SCREWS #10 TO STUD W H ST/AD8 2 1 ⁄2 13 7 ⁄8 24 ST/AD10 2 1 ⁄2 16 1 ⁄8 30 ST/AD15 2 3 ⁄4 21 1 ⁄2 48 ST/AD ANCHOR DOWNS Design Features… three configurations are available for easy steel stud installation. The narrow width accommodates inside dimensions of steel studs, while the lessened heights will not interfere with knockouts. Material… ST/AD8, 10 ga. body with 3 ⁄8" base; ST/AD10, ST/AD15, 7 ga. with 1 ⁄2" base. Installation… all specified fasteners must be used to achieve design loads. The anchor bolt is 7 ⁄8" x (ST/AD8) and 1" x (ST/AD10 and ST/AD15). Length specified by the engineer. Finish… SUPERSPEED ® gray paint. STEEL STUD HARDWARE

Articles in this issue

Links on this page

view archives of Alpine - Structural Connectors Catalog 2015-2016