Issue link: http://alpine.uberflip.com/i/586848
12 alpineitw.com (800) 521-9790 E ECONOMY JOIST HANGERS Design Features… combine greater strength with maximum economy. SUPERSPEED ® prongs secure E hangers to header for fast, easy nailing. • Joist sizes… 2 x 4 to 2 x 14. Material… 18 ga. galvanized steel. Special… economical price and ease-of-use make these an ideal hanger for the do-it-yourself market. Code Report Reference(s)… ESR-2929 E210 MSL MSR SSL SSR MEDIUM SKEWED HANGERS (45°) STANDARD SKEWED HANGERS (45°) Design Features… standard and medium skewed hangers are offered to promote further standardization and construction economies, and to provide compatibility with the SUPERSPEED ® line of S standard and H heavy joist hangers. • Joist sizes… 2xs, 3xs, 4xs and double 2xs. MSL/MSR – 14 ga. galvanized steel. SSL/SSR – 16 ga. galvanized steel. Loads… larger seat-bearing and designed direct nailing provide proper installation of all nails into joist hangers. Special… skewed hangers are labor savers. No angle butt-cuts are required. Reversed flanges are available in the SSL/SSR and MSL/MSR hangers furnished with one flange turned in while the other remains out. Code Report Reference(s)… ESR-2929 SSL410R (Reversed Flange) MSR SSL210 JOIST AND TRUSS HANGERS AND HARDWARE LSS LIGHT SLOPED/SKEWED HANGERS Design Features… combination sloped skewed hangers offer further standardization and construction economy. They also provide compatibility with the SUPERSPEED ® line of S standard joist hangers. LSS hangers can be used to connect rafters to ridge beams in vaulted roof structures. • Joist sizes… 2xs, 3xs, 4xs, double 2x-s and wood I-joist sizes. Material… 18 ga., 16 ga., and 14 ga. galvanized steel. Loads… larger seat-bearing and designed direct nailing provide proper installation of all nails into joist hangers. Special… LSS eliminates skewed and sloped hanger mix-ups and delays (any slope up or down, to and including, a 12/12 pitch and any skew right or left up to 45°). Ordering/Specifying Information… The LSS5.12 must be factory skewed 0° to 45°. It may be field sloped to 45°. (LSS4.12 and LSS3510-2 are similar) Configurations of some models may differ from those shown. Code Report Reference(s)… ESR-2929 A Flange LSS210 Slotted Holes Are Provided for Skewable Field Bending Application