Issue link: http://alpine.uberflip.com/i/586848
38 alpineitw.com (800) 521-9790 H210 Sloped Up/Sloped Down (1-Piece Design) RA412 Skewed Right (Welded) RA412 Sloped Down (Welded) RA412 Skewed Left – Sloped Down (1-Piece "U" Strap Design Welded to Top Flange Angle) IMPORTANT We can also provide 1-piece hangers for skewed, sloped and skewed and sloped combination hangers when appearance is important in exposed project construction. We can manufacture almost any type of hanger for your needs. Just simply state: (1) the type of hanger Example: Heavy (H). (2) the size of the hanger Example: 4 x 12 (H412). (1) the modifications) that is needed Example: Modifications skewed (H412 skewed right 30°) Modifications sloped down 4 ⁄12 pitch (H412 skewed right 30°, sloped down 4 ⁄12 pitch). For additional modified hanger types, ask for the Technical Manual. Load Direction Variation % of Design Load Down Skewed 100 Down Sloped 100 Down Combination 100 Down Offset 50 Down Ridge 100 Specify Degrees Sloped Up or Sloped Down (30° Maximum) H210 Skewed Left – Sloped Down (1-Piece Formed Design) No Welds LOAD DIRECTION VARIATION % OF DESIGN LOAD Down Skewed 100 Down Sloped 100 Down Combination 80 Uplift *Skewed 75 *Greater than 15% LOAD DIRECTION VARIATION % OF DESIGN LOAD Down Sloped 1° to 30° 100 Down Sloped 31° to 45° 80 SI H HTF STANDARD JOIST HANGERS (Page 62) HEAVY JOIST HANGERS (Page 26) HEAVY TOP FLANGE JOIST HANGERS (Page 28) Design Features… skewed hangers, sloped hangers and combination skewed and sloped hangers are also manufactured from 1-piece prime galvanized steel (no welded parts). R RA RHG ROOF HANGERS (Pages 46 and 60) ROOF ANGLED HANGERS (Pages 46 and 60) ROOF HEAVY GLU-LAM HANGERS (Page 46) Design Features… the normal manufacturing technique for custom or modified R series hangers is a 3-piece welded design. The seat is welded to the two side flanges. RSH RSG RSGH ROOF STRUCTURE (Page 44) ROOF STRUCTURE OREGON (UPLIFT) (Page 44) ROOF STRUCTURE HEAVY (Page 44) ROOF STRUCTURE GLU-LAM (Page 44) ROOF STRUCTURE (Page 44) Design Features… the RS series hangers can only be sloped. For the skewed series, see the above R series. Material… 1-piece galvanized or prime quality steel. SKEWED OR SLOPED JOIST HANGERS