Issue link: http://alpine.uberflip.com/i/586848
78 alpineitw.com (800) 521-9790 HA HURRICANE ANCHOR CLIPS Design Features… The HA anchor series is manufactured to attach metal plate connected trusses, framing members and wall members, made of solid sawn or structural composite lumber; to solid sawn or structrual composit lumber wall members. The HA2.5 product may be used on either or both sides for the supported member. The HA anchors resists upward load, lateral load perpendicular to the supported truss or framing member. Attachment is required to the lower portion of the supported truss or framing member, and the top plates of the supporting wall, or wall stud and anchored sill (bottom) plate(s). Material… 18 ga. galvanized steel. Code Report Reference(s)… ER-0176 1" 6" HA2.5 HA2.5 TCD TC TCH TC TCD TCH TRUSS CLIPS Design Features… permit easy, fast tying of trusses to non-load-bearing walls. Vertical slotted hole allows vertical movement for quick and simple truss seating under a full, dead load condition. Material… 18 ga. galvanized steel. Installation… TC –2 nails to plate, 1 into slot. TCD – 4 nails to plate, 2 into slots. TCH – has a 2 1 ⁄8" slot to accommodate the movement of commercial trusses for high lateral capacity.