Issue link: http://alpine.uberflip.com/i/915756
127 (800) 521-9790 alpineitw.com PASLODE ® POSITIVE PLACEMENT ® NAILS Paslode ® Positive Placement ® Nails are acceptable substitutes for specified nails for Alpine's face mount hangers, hurricane and seismic anchors, clips, and straps. Due to the 2005 NDS ® for Wood Construction requirements for nail penetration, some Paslode nail sizes may have reductions. Please refer to the following chart for Allowable Load Adjustment Factors: ALPINE LISTED NAIL PASLODE INSTALLED NAIL ALLOWABLE LOAD ADJUSTMENT FACTOR FULL VALUE NAIL CONVERSION 16d common 2½" x .162" (P16) 1.0 10d common 2½" x .148" (P10L) 1.0 10d common 1½" x .148" (P8d) 1.0 8d common 2½" x .131" (P10) 1.0 10d x 1-1/2 1½" x .148" (P8) 1.0 8d x 1-1/2 1½" x .131" (P8) 1.0 REDUCED VALUE NAIL CONVERSION 16d common 2½" x .148" (P8d) 0.84 16d common 2½" x .131" (P10) 0.69 16d common 1½" x .148" (P8) 0.84 16d common 1½" x .131" (P8d) 0.69 10d common 2½" x .131" (P10) 0.83 10d common 1½" x .131" (P8) 0.83 10d x 1-1/2 1½" x .131" (P8) 0.83 • For Alpine products with multiple fastener sizes specified, use highest reduction factor of the fasteners listed. • Allowable loads in Alpine literature assume fastening into Spruce Pine Fir, Douglas Fir-Larch, or Southern Pine Lumber. • Different lumber species may require additional load reductions. Determine appropriate reduction in accordance with the provisions of the American Forest and paper Association National Design Specification for Wood Construction (NDS), 2005 edition. • Adjustment factors DO NOT APPLY to hangers requiring double shear joist nailing. Additional reductions may be necessary depending upon fastener length. PRODUCT CODE DIMENSIONS (INCHES) NOMINAL SIZE CARTON QUANTITY 650025 1½" x .131" P8 4,000 650645 1½" x .131" P8 1,000 650026 1½" x .148" P10 3,000 650646 1½" x .148" P10 1,000 650199 2½" x .131" P8d 2,500 650027 2½" x .148" P10L 2,500 650028 2½" x .162" P16 2,000 PRODUCT CODE DIMENSIONS (INCHES) NOMINAL SIZE CARTON QUANTITY 650197 1½" x .131" P8 4,000 650014 1½" x .148" P10 3,000 650481 1½" x .148" P10 2,000 650106 2½" x .148" P10L 2,500 650198 2½" x .162" P16 2,000 Brite Positive Placement ® Nails Benefits • Heat-Treated – Hardened nails improve drive performance and reduce nail bending. • Head Marked – Nail heads are marked for easy reference during inspections. • ProStrip™ Paper Tape Collation – Patented formula provides clean shear for consistent drive performance. Maintains strip integrity when in contact with moisture. • Evaluations – ICC-ES Recognized – ESR-2126 Galvanized Positive Placement ® Nails Benefits • Heat-Treated – Hardened nails improve drive performance and reduce nail bending. • Mechanically Galvanized – Premium corrosion protection with code recognition. Recognized for use in ACQ and all pressure treated lumber. • Head Marked – Nail heads are marked for easy reference during inspections. • ProStrip™ Paper Tape Collation – Patented formula provides clean shear for consistent drive performance. Maintains strip integrity when in contact with moisture. • Evaluations – ICC-ES Recognized - ESR-2126, ESR-3326 (Galvanized) Galvanization meets ASTM B695 Class 55 (1 Oz./ft² zinc coating)