Issue link: http://alpine.uberflip.com/i/915756
122 alpineitw.com (800) 521-9790 RA412-HNP Accepted with 10d Nails or Plywood Nails RS414-HNP 16d Nails for Both Header and Joist RAU 3.25/H = 19 1 ⁄2" With Torsional Strap – 10d Nails or Plywood Nails Material 3 ⁄16" x 2" x 7" 1 ⁄4" x 2 1 ⁄2" x 10" ( ) PRODUCT CODE REF NO FASTENERS SOLID CONCRETE DESIGN LOADS (LBS) GROUTED CMU DESIGN LOADS (LBS) HEADER JOIST UPLIFT MAX DOWN LOAD UPLIFT MAX DOWN LOAD TOP FACE (1.33) (1.33) MBHG MBHA 1-ATR 3 ⁄4 x 8 1-ATR 3 ⁄4 x 8 18-10d 3180 6065 3180 5500 MBHG with H = 7 1 ⁄4 MBHA with H = 7 1 ⁄4 1-ATR 3 ⁄4 x 8 1-ATR 3 ⁄4 x 4 3 ⁄4 18-10d 2000 4410 2000 4410 PRODUCT CODE DIMENSIONS W D MBHG3.12/9.25 3 1 ⁄8 9 1 ⁄4 MBHG3.12/11.25 3 1 ⁄8 11 1 ⁄4 MBHG3.56/7.25 3 9 ⁄16 7 1 ⁄4 MBHG3.56/9.25 3 9 ⁄16 9 1 ⁄4 MBHG3.56/11.25 3 9 ⁄16 11 1 ⁄4 MBHG3.56/11.88 3 9 ⁄16 11 7 ⁄8 MBHG3.56/14 3 9 ⁄16 14 MBHG3.56/16 3 9 ⁄16 16 MBHG3.56/18 3 9 ⁄16 18 MBHG5.50/7.25 5 1 ⁄2 7 1 ⁄4 MBHG5.50/9.25 5 1 ⁄2 9 1 ⁄4 MBHG5.50/11.25 5 1 ⁄2 11 1 ⁄4 MBHG5.50/11.88 5 1 ⁄2 11 7 ⁄8 MBHG5.50/14 5 1 ⁄2 14 MBHG5.50/16 5 1 ⁄2 16 MBHG5.50/18 5 1 ⁄2 18 MBHG Typical Applications MBHGR Skewed Right 45° HNP UPLIFT (U) HAYWARD NAIL PATTERN OR UPLIFT HANGERS Design Features… both the R or the RS series can be modified for the HNP uplift… provides header or face nailing with additional purlin nailing. Recommended for areas that require additional nailing for higher uplift loads. A torsional rotation strap may also be supplied to modify the R or the RS series hangers and is recommended to counter rotation problems for hangers 18" and deeper. The strap also acts as a stiffener to eliminate buckling in the "U" strap. HNP modifications have been tested by independent laboratory tests conducted in accordance with code criteria, with a minimum safety factor of three. Loads… for the RS4HNP and the RA4HNP, see page 38. Ordering Information… to order hangers other than HNP, start with stock no. RH 3.25/19 1 ⁄2, add "U" after standard stock description RHU 3.25/19 1 ⁄2 for uplift call out. Code Report Reference(s) MBHG MASONRY BEAM HANGERS GALVANIZED Design Features… the MBHG is a single piece, non-welded connector available for solid sawn, truss and engineered wood products. The only skew for the MBHG is a standard 45° either right or left. The maximum allowable download is 3505 lbs and 1585 lbs uplift for height 7.25. For all other models, use the table listed download and uplift. Material… 10 ga. galvanized steel. SPECIAL AND CUSTOM JOIST HANGERS