Loading from iDesign
Assuming the truss has been created from scratch in iDesign, we are ready to add the loads.
1. Select Loading Icon
2. Select Add Load Case
3. Select the Hip Loading tab from the Add Loads dialog box. Even though this girder is not
a #1 hip, we still use Hip Condition to apply the loads.
4. Set Jack Types to No Jacks (A below). Setting this field to No Jacks tells intelliVIEW that it
is not a #1 hip and that 1' of PLF is to be added to ones face.
5. Select the Hip Girder Button (B above)
