14
AutoSet C4
™
P R O D U C T M A N U A L
EN
3.5. Table Options Screen
Click on a section of the table (Figure 17) to open the
Table Options Screen (Figure 20). On this screen liftouts
can be be set as Inactive/Active. Additionally, pucks can
be set to Bottom/Top for each rod. The settings made
on this screen apply only to the selected table, not the
entire system.
Figure 20
NOTE
If you click on a member of the truss instead of the table
Figure 21 will appear. Click OK, then click on the table to open the
Table Options Screen.
Figure 21
3.4.1. Move Truss Screen
If jogging the truss does not resolve the setup error,
click the Move Truss Exactly button on the Truss Setup
Screen (Figure 17). Clicking the Move Truss Exactly
button opens the Move Truss Screen (Figure 19).
Figure 19
Select Move Left, Right, Up or Down, then enter the
dimensions for the move and click OK.
The entry format is Feet, Inches, Sixteenths.
Click OK once the move dimensions have been entered
correctly.
To exit the Move Truss Screen return to the Truss Setup
Screen, click Cancel.
