4. By default, intelliVIEW populate the
data fields, based on the truss being
loaded. It recommended that you
verify that these entries are correct
before proceeding.
5. Select the Apply button to load the
truss and then select the Done button
to close the dialog window.
6. The image (right) displays the
resultant loads.
From iModel
When the cantilevered hip jack is created in
layout, the loads can be generated
automatically using the Structural Fascia
option.
The structural fascia, shown right, supports
the corner jack CJ1, CJ3, and CJ5. The fascia
is supported by the Hip Jack HJ10, the end
jack CJ7, and the #1 hip girder truss.
