10
AutoSet C4
™
P R O D U C T M A N U A L
EN
!
CAUTION
Make sure the tabletop is clear of all persons, lumber, jig stops
and obstructions during the Homing process.
When the AutoSet C4 system is powered up it will
require the system to run the Homing procedure. Click
OK when prompted on the screen and the system will
Home automatically (Figure 12).
Figure 12
Title Picture Description
Home Click to Home the selected group of pucks.
Setup Click to Setup the truss using the pucks in the selected group.
Return Click to Return the pucks to their baseline positon.
Toggle
Click Toggle to move all the pucks to the Top Chord side.
Click Toggle again to return to alternating the pucks between the top and
bottom of the chord.
Stop Click Stop to stop puck movement.
Reset Click Reset to clear the system faults.
Tools Click to open the Maintenance and Tools Screen (Section 3.6)
Exit Click Exit to close the AutoSet C4 Program.
Toolbars
Click to list all of the available Toolbars.
From this screen select which Toolbars display on the Main Menu (Figure 13)
3.1. Main Menu
Figure 13
The following table denes each button using its
corresponding picture which can be identied on
Figure 13.
3. AutoSet C4 Software
Figure 14
