Alpine Equipment

©2017 Alpine, a division of ITW Building Components Group Inc. Form L1007-R4 10/17 RAM EasyRider Gantry: Travels at 140 feet per minute. Roller is 24 inches in diameter. Control: Gantry is controlled by a joystick for both travel and liftout actuation. Panel switches can control 16 liftouts. Tables: Each table work surface is 7 ft.-1 in. wide by 14 ft.-3 in. from top to bottom. Jigging: Steel top. Electrical: 208 V 25 A 30 with transformer 230 V 22 A 30 460 V 11 A 30 or 115 V 15 A 10 Alpine RAM EasyRider ™ Gantry The most versatile truss fabrication system available The Alpine RAM EasyRider gantry moves smoothly and quietly up and down the table. It is mounted on rails attached to the sides of the table, eliminating the safety hazards and inconveniences associated with floor tacking systems. The operator rides on the gantry and never leaves the table during production. Positionaing the operator on the gantry provides visibility of the table from a safe location. When the gantry is not in operation, this same operator remains on top of the table, assembling the upper pieces of the truss. The other assemblers stay on the floor, building the lower portion of the truss. Distribution of the workload with the Alpine RAM EasyRider gantry system is smooth, efficient and productive. Without walkways, the entire working surface can be used for jigging and pressing. The gantry operator steps from the platform directly onto the table to position the upper truss pieces and connectors. A joystick controls both gantry travel and liftouts. Exceptional visibility is available from the operator platform. ▪ Highly Efficient ▪ Labor Saving ▪ Trackless Movement

• EN