©2017 Alpine, a division of ITW Building Components Group Inc. Form L1007-R4 10/17
Call Alpine Equipment at
800-521-9790
to order today
RollerPress
Specifications:
Capacity (roller length): 15 ft.-6 in.
Overall length: 17 ft.-6 in.
Overall width: 6 ft.-0 in.
Overall height: 6 ft.-10 in.
Floor height
(to top of bottom roll): 2 ft.-6-3/16 in.
Weight: 13,100 lbs.
Alpine RollerPress
™
Heavy duty 24" roller press
With today's computer-controlled setups, multiple jigging
systems, and back-to-back gantry systems, the roller press
sees continuous operation.
This essential piece of equipment must be strong,
dependable and reliable.
The quality of the engineering and the strength of the
components ensure that the Alpine RollerPress
consistently gets the job done.
Roller construction:
A four-inch round steel shaft runs completely through the
24-inch diameter body of each roll. The wall of the roll is
one inch thick, with nine half-inch baffles hard-welded to
the shaft and roll. End baffle gussets are included for
additional strength. Each roller's shaft ends are mounted
with sealed, self-aligning roller bearings.
If you're looking for highly dependable roller press, the
Alpine RollerPress is all you need. Its strong, robust features
completely embed plates of all sizes in a single pass,
ensuring quality trusses for your customers.
▪ Easy Operation
▪ Sturdy Design
▪ Minimal Maintenance
155 Harlem Avenue
North Building – 4th Floor
Glenview, Illinois 60025
800-521-9790
alpineitw.com