Alpine

Hardware Catalog Dec 2013

Issue link: http://alpine.uberflip.com/i/221331

Contents of this Issue

Navigation

Page 11 of 125

STP STANDARD TRUSS PLATED HANGERS Design Features . . provide proper balance between load-carrying capacity of hanger and the truss it supports. • Joist sizes . . 2xs, 3xs, 4xs, double 2xs, and triple 2xs. Material . . 18 ga. galvanized steel. Loads . . seat dimension (see table) provides solid larger seat-bearing area. New higher loads possible with only common nails. Special . . greater strength combined with economical price and ease-of-nailing make these an ideal hanger for the competitive construction trade. Skewed and Sloped Hangers . . not available in STP series. See SSR/SSL or S series hangers, pages 8 and 9. HTP HTPR HEAVY TRUSS PLATED HANGERS Design Features . . constant dimensional accuracy and precision controlled 90° angles assure proper joist bearing (flat seat) and header connection alignment. Two design styles are available with standard or reversed flanges (turned inward). • Joist sizes . . 4xs and double 2xs. Material . . 14 ga. galvanized steel. Loads . . 2 " seat dimension provides solid larger seat-bearing area. New higher loads possible with only common nails. Skewed and Sloped Hangers . . not available in HTP series. See MSL/MSR series, pages 8 and 9 or H series, pages 16 and 17.  HTPTF HEAVY TRUSS PLATED HTPTFR TOP FLANGE HANGERS Design Features . . with the addition of a top flange, the heavy truss hanger meets or exceeds specifications for schools and public buildings, where strength, support, and safety are prime requirements. Two design styles are available with standard or reversed flanges (turned inward). • Joist sizes . . 4xs and double 2xs. Material . . 14 ga. galvanized steel. Special . . greater strength combined with economical price and ease-of-nailing make these an ideal hanger for the competitive construction trade. Skewed and Sloped Hangers . . not available in HTPTF series. See HTF series, pages 18 and 19. HDTP HEAVY-DUTY TRUSS PLATED HANGERS Design Features . . HDTP universal facemount hanger is designed for wood plate trusses and heavily loaded members. • Joist sizes . . 2xs, 4xs, double 2xs, triple 2xs, and quad 2xs. Material . . HDTP2x – 16 ga. galvanized steel. HDTP4x, 2x-2 – 14 ga. galvanized steel. Loads . . 3" seat dimension provides the greatest bearing area of any hanger available. Super capacity design loads are the highest of any universal face-mounted hanger. Special . . larger header flange and joist seat make this hanger very easy to install with common nails. Skewed and Sloped Hangers . . (see page 43). STP210 "Slant Nailing" (Toe Nailing) Drive Full Length Common Nails at 45° into Joist for Header Connection HTP412 "Slant Nailing" (Toe Nailing) Drive Full Length Common Nails at 45° into Joist for Header Connection HTPTF414 "Slant Nailing" (Toe Nailing) Drive Full Length Common Nails at 45° into Joist for Header Connection HDTP210 "Slant Nailing" (Toe Nailing) Drive Full Length Common Nails at 45° into Joist for Header Connection 12 

Articles in this issue

view archives of Alpine - Hardware Catalog Dec 2013