Issue link: http://alpine.uberflip.com/i/221331
SKEWED OR SLOPED JOIST HANGERS S H HTF STANDARD JOIST HANGERS (Pages 8 and 38) HEAVY JOIST HANGERS (Pages 16 and 38) HEAVY TOP FLANGE JOIST HANGERS (Page 18) Design Features . . skewed hangers, sloped hangers and combination skewed and sloped hangers are also manufactured from 1-piece prime galvanized steel (no welded parts). LOAD DIRECTION VARIATION Specify Degrees Sloped Up or Sloped Down (30° Maximum) % OF DESIGN LOAD Down Skewed 100 Down Sloped 100 Down Combination 80 *Skewed 75 Uplift H210 H210 Sloped Up/Sloped Down (1-Piece Design) Skewed Left – Sloped Down (1-Piece Formed Design) No Welds *Greater than 15% R RA RH RHG ROOF HANGERS (Pages 22 and 23) ROOF ANGLED HANGERS (Pages 22 and 23) ROOF HEAVY HANGERS (Pages 22 and 23) ROOF HEAVY GLU-LAM HANGERS (Pages 22 and 23) Design Features . . the normal manufacturing technique for custom or modified R series hangers is a 3-piece welded design. The seat is welded to the two side flanges. Load Direction Variation Skewed Down % of Design Load 100 Down Sloped 100 Down Combination Offset Ridge 100 RA412 Skewed Left – Sloped Down (1-Piece "U" Strap Design Welded to Top Flange Angle) 50 Down RA412 Sloped Down (Welded) 100 Down RA412 Skewed Right (Welded) IMPORTANT KC® Metal Products, Inc. can also provide 1-piece hangers for skewed, sloped and skewed and sloped combination hangers when appearance is important in exposed project construction. ROOF STRUCTURE RS412 (Pages 20 and 21) 4X Nailer on I-Beam ROOF STRUCTURE OREGON (UPLIFT) (Pages 20 and 21) ROOF STRUCTURE HEAVY (Pages 20 and 21) ROOF STRUCTURE GLU-LAM (Pages 20 and 21) ROOF STRUCTURE (Pages 20 and 21) Design Features . . the RS series hangers can only be sloped. For the skewed series, see the above R series. Material . . 1-piece galvanized or prime quality steel. LOAD DIRECTION VARIATION % OF DESIGN LOAD Down Sloped 1° to 30° 100 Down Sloped 31° to 45° 80 RS412 Sloped Down (1-Piece Design) RS412 Sloped Down We can manufacture almost any type of hanger for your needs. Just simply state: (1) the type of hanger Example: Heavy (H). (2) the size of the hanger Example: 4 x 12 (H412). (1) the modifications) that is needed Example: Modifications skewed (H412 skewed right 30°) Modifications sloped down ⁴⁄₁₂ pitch (H412 skewed right 30°, sloped down ⁴⁄₁₂ pitch). For additional modified hanger types, ask for our Technical Manual. 45 RS RSO RSH RSG RSGH