6
SmartView
P R O D U C T M A N U A L
EN
3. Add Custom Dimension: Click on the add custom dimension (Figure 2) to start the process of creating a custom
dimension:
• Click on the rough area to zoom in on the first measurement point.
• Click on the joint intersection point to use as the first endpoint (Figure 7).
• Click on the second area to zoom for the second point.
• Click the joint intersection point for the second endpoint.
A yellow measurement line will be created between the selected endpoints with the custom dimension located in the
center if that yellow line (Figure 8)
4. Clear Custom Dimension: Click on this button (Figure 2) to remove any custom dimensions from being displayed.
Figure 8 – Custom dimension
Figure 7 – Selecting 1st endpoint for a custom dimension
