25
AutoSet C4
™
P R O D U C T M A N U A L
EN
Appendix B – Maintenance Checklist
C4 Table System Machine Inspection Guide and Maintenance Log Date _____/_____/_____
DAILY
Mon Tue Wed Thur Fri Sat Sun
Safety devices and motor brake
Clean debris from table top and cable track
Inspect cable track (E-chain) for loose or damaged links
Drain Filter/Regulator
WEEKLY
Inspect air lines and solenoid valves for leaks
Inspect guide wheels for wear
Grease guide wheels
Inspect the gantry gearbox for leaks
Inspect the motor and coupling to see that they are not slipping or separating
Inspect the motor and motor mount hardware
Blow o acme rods
Lubricate acme rods with WD40 or similar
Run pucks full length of table, up and back, to clean acme rods
Inspect glide assemblies for damage
MONTHLY
Inspect the gantry drive chain tension
Lubricate the gantry drive chain
Check squareness of gantry head
QUARTERLY
Grease the roll bearings on both ends of gantry – 2 pumps NLGI grade No.2
Inspect load runners on bottom track
Check guide wheel clearance
Inspect the distance from the load runner surface to bottom track surface
Grease bearings on automated axis of table
YEARLY
Inspect leveling leg jam nuts and verify that table surface is level
Tighten center support legs
Check for loose or missing hardware
Check the gantry gear box uid level
P L E A S E M A K E P H O T O CO P I E S O F T H I S F O R M F O R LO G G I N G M A I N T E N A N C E
