Issue link: http://alpine.uberflip.com/i/530982
53 ALS 4.0 P R O D U C T M A N U A L EN There is one grease fitting on each gripper assembly. To access them, make sure each gripper assembly is fully retracted. The fitting will be visible through the access hole at the rear of the machine (4 total). Figure 154 5.4 Automated Infeed There are 4 grease fittings on the bearing block for the printer encoder wheel. The fittings can be accessed from the rear of the machine (4 total). Figure 152 Below the rollcase for the Automated Infeed conveyor there is a driveshaft that powers each of the lumber strands on the Live Deck. On this driveshaft there are a total of 8 bearings that each contain one grease fitting (8 total). Figure 153