Issue link: http://alpine.uberflip.com/i/530982
41 ALS 4.0 P R O D U C T M A N U A L EN Figure 111 Step 7 – Select "Execute L1 Calibration". This button is shown in Figure 111 and Figure 112. Figure 112 The following message (Figure 113) should appear. Figure 113 Step 8 – Repeat for axis L2. Step 9 – Select "Exit". Step 4 – To calibrate L1/L2, select "Controller" from the task bar at the bottom of the screen (Figure 109). Figure 108 The screen in Figure 109 will appear: Figure 109 Step 5 – Select the "Calibrate L1 & L2 & L1P Lengths" button (circled on Figure 109 and shown in Figure 110). Figure 110 Step 6 – Enter the commanded distance (the length input) and the actual measured distance using the box shown in Figure 111.