Issue link: http://alpine.uberflip.com/i/530982
32 ALS 4.0 P R O D U C T M A N U A L EN 3.14.4 Cutting lumber in Semi Mode The operator creates the part as normal (Read sections 3.2-3.4), and then selects setup - Run Button. The operator can now select lumber station, and then run Button to cut piece(s). To restart the Ranger-ALS, the deck must be clear, and the operator has to reset the system by doing the reset procedure on 3.14.2.1 (Prior to cutting lumber). The operator must go to clear the deck overview screen by pressing the clear deck queue icon. After the operator cuts the part required, he or she can return to the auto mode and resume the previous cutting job.