Issue link: http://alpine.uberflip.com/i/493471
1 2 3 4 5 6 7 8 5.05 RIGHT ANGLE (90ยบ) TRUSS CHORD-TO-CHORD CONNECTIONS Description Right angle truss-to-truss connections may be made at the truss chords by using TSJH-series hangers. TSJH-series hangers may be used to fasten supported trusses to single, double and triple-ply girder trusses. Fasteners Hanger connections are made using industry- standard #10 self-drilling tapping screws. Allowable loads shown are for full fastener patterns. There are also allowable load values available based upon partial fastener patterns. See the referenced Standard Details for more information. Reference Standard Details Please refer to these Standard Details for information regarding the selection of TSJH- series hanger sizes and installation requirements: TS022 connecting to single ply girder trusses TS022A connecting to single ply girder trusses TS023 connecting to multi-ply girder trusses TS024A connecting to multi-ply girder trusses TSC2.75 supported truss connection to TSC2.75 girder truss with TSJH22 Hanger. Connections using TSJH Hangers TSC2.75 supported truss connection to TSC 3.00 or TSC4.00 girder truss with TSJH24 Hanger. TSC3.00 or TSC4.00 supported truss connection to TSC3.00 or TSC4.00 girder truss with TSJH44 Hanger Allowable Load LBS (kN) Down Up 28TSC 22 GA 740 (3.29) 680 (3.02) Maximum Connection Reactions Downward and Uplift TSC2.75 Girder with TSC2.75 Supported Truss Using TSJH22 Hangers Girder Chord Gauge 33TSC 20 GA 920 (4.09) 770 (3.43) 43TSC 18 GA 1380 (6.14) 1010 (4.49) Allowable Load LBS (kN) Down Up 28TSC 22 GA 920 (4.09) 610 (2.71) TSC4.00 Girder with TSC2.75, TSC 3.00 or TSC4.00 Supported Truss Using TSJH24 and TSJH44 Hangers Girder Chord Gauge 54TSC 16 GA 1360 (6.05) 1130 (5.03) 33TSC 20 GA 1140 (5.07) 780 (3.47) 43TSC 18 GA 1350 (6.01) 1010 (4.49) ENGINEERED BY ALPINE CO N N E C T I O N S / D E TA I L S Allowable Load Girder Chord Gauge LBS (kN) 68TSC 97TSC Down 1340 (5.96) 1340 (5.96) Up Gravity Wind 1200 (5.34) 1200 (5.34)