TrusSteel - Cold Formed Steel Trusses

Steel Truss Design Manual 2017

Issue link: http://alpine.uberflip.com/i/493471

Contents of this Issue

Navigation

Page 56 of 77

1 2 3 4 5 6 7 8 5.09 Connections using TSUC Clips Description CFS trusses may be anchored to heavy steel bearings by using TrusSteel TSUC clips. Several sizes of TSUC clips are available, depending upon the required load transfer capability. Fasteners These clips are attached to the truss with #10 self-drilling tapping screws. Clips are attached to bearing with #12 or #14 screws, or pins. TSUC5 Clip attached to red iron bearing. See Standard Details for fastener placement. FASTENED CONNECTIONS TO HEAVY STEEL BEARINGS Reference Standard Details Please refer to these Standard Details for information regarding the selection of TSUC clips, clip sizes, installation requirements and lateral load capacities: TS039 pins into 3/16" to 1/2" steel TS040 pins into 3/16"to 1/2" steel TS047 screws into 1/8" to 1/2" steel TS048 screws into 1/8" to 1/2" steel TSUC5 Clip attached to concrete bearing with Tapcon ® fasteners. Description CFS trusses may be anchored to concrete bearings by using TrusSteel TSUC clips. Several sizes of TSUC clips are available, depending upon the required load transfer capability. Fasteners These clips are attached to the truss with #10 self-drilling tapping screws, and can be attached to the bearing with Tapcon ® fasteners. Reference Standard Details Please refer to these Standard Details for information regarding the selection of TSUC clips, clip sizes, installation requirements and lateral load capacities: TS030 TS031 FASTENED CONNECTIONS TO CONCRETE BEARINGS Connections using TSUC Clips Maximum Connection Reactions - Uplift Clip TSUC3 TSUC3 TSUC5 TSUC5 TSUC3 TSUC5 Steel Thickness IN (mm) 3/16 (4.76) 1/4 (6.35) to 1/2 (12.70) 3/16 (4.76) 1/4 (6.35) to 1/2 (12.70) 1/8 (3.18) to 1/2 (12.70) 1/8 (3.18) to 1/2 (12.70) Clip on One Face LBS (kN) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) Clip on Each Face LBS (kN) 1230 (5.47) 1230 (5.47) 2050 (9.12) 2050 (9.12) 1230 (5.47) 2050 (9.12) Standard Detail TS039 TS039 TS040 TS040 TS047 TS048 Maximum Connection Reactions - Uplift Clip TSUC3 TSUC3 TSUC3 TSUC3 Concrete Strength PSI (MPa) 2000 (13.79) 3000 (20.68) 4000 (27.58) 5000 (34.47) Clip on One Face LBS (kN) n/a n/a n/a n/a Clip on Each Face LBS (kN) 520 (2.31) 570 (2.54) 660 (2.94) 740 (3.29) Standard Detail TS030 TS030 TS030 TS030 TSUC5 TSUC5 TSUC5 TSUC5 2000 (13.79) 3000 (20.68) 4000 (27.58) 5000 (34.47) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 520 (2.31) 570 (2.54) 660 (2.94) 740 (3.29) TS031 TS031 TS031 TS031 ENGINEERED BY ALPINE CO N N E C T I O N S / D E TA I L S

Articles in this issue

view archives of TrusSteel - Cold Formed Steel Trusses - Steel Truss Design Manual 2017