©2017 Alpine, a division of ITW Building Components Group Inc. Form L1008-R3 10/17
Call Alpine Equipment at
800-521-9790
Order yours today
Technical Specifications
Ejection: Side eject
Table width: 6 feet 8.5 inches
Table height:
29 inches + 5 inches for setting
optimal working height
Table surface:
½ inch steel top, supported by a
steel channel frame
Roller: 24 inches
Drive motor:
3-phase, 10 horsepower
soft start motor
Speed: 160 feet per minute
Air requirement: 10 CFM at 90 psi
Camber: 0.625 inch over 40 feet
Truss Dimensions:
Maximum length: 40 feet
Range of depth: 12–24 inches
FloorMaster
floor truss production system
Plate pockets are located on each end of the table. Keep the plate pockets
fully stocked to maximize production efficiency. On table splicing is an
option that saves labor and space by eliminating a separate splicing station.
Air clamping makes the Alpine FloorMaster extremely versatile, allowing
floor truss depth to vary with no change to the machine setup. Pneumatic
cylinders are located safely underneath the table surface, protecting them
from damage. The Gantry parking bay allows extended clearance for easy
truss ejection.
Safety is integrated into each component of the Alpine FloorMaster.
E-stop push bars are standard on each side of the gantry. Clamping surfaces
are painted yellow for awareness and integrated scanners detect objects in
the path of the gantry. The scanner will stop the gantry when it detects
workers, tools, loose plates, or any object that extends above the truss.
155 Harlem Avenue
North Building – 4th Floor
Glenview, Illinois 60025
800-521-9790
alpineitw.com
