Alpine

Hardware Catalog Dec 2013

Issue link: http://alpine.uberflip.com/i/221331

Contents of this Issue

Navigation

Page 114 of 125

TRUSSLOK-Z SCREW INSTALLATION INSTALLATION PROCEDURE • • • • PRODUCT FEATURES Install using a 1/2" corded or 18 volt cordless drill. Bring underside of washer head flush with wood surface. Do not countersink. Chose correct TrussLok-Z length. See chart below. Always refer to truss manufacturer's engineering specifications for fastening patterns. BUILT UP "CAMBER" UNDER HEAD FOR ADDED STRENGTH TrussLok-Z Selection Guide 2 ply 3 ply 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 27⁄ 8" 41⁄ 2" 1 1 1 1 1 TRUSSLOK-Z TRUSSLOK-Z 4 ply EPOXY COATED WITH ANTI-FRICTION TOP COAT 1 ⁄ 2 1 ⁄ 2 11⁄ 2 11⁄ 2 1 1 6" TRUSSLOK-Z For complete design values and engineering data, available through ICC-ES, see report ESR #1078 at www.icc-es.org. A Professional Engineer (PE) is responsible for designing all connections, which include end/ edge minimums and the number and location of all fasteners to meet local and national building codes as well as wood truss manufactuerer's engineering requirements. Photograph showing the TrussLok-Z usage should not be used as a reference for fastening patterns. QUANTITY PER BOX SCREW LENGTH PART NUMBER 50 27/8" 13/8" FMTSZ412-50 50 41/2" 13/8" FMTSZ006-50 50 6" 13/8" FMTSZ278-500 500 27/8" 13/8" FMTSZ412-250 250 41/2" 13/8" FMTSZ006-250 250 6" SHARP GIMLET POINT FOR FAST DRILLING THREADING FMTSZ278-50 CORRECT THREAD LENGTH. DRAWS PLIES TOGETHER WITHOUT "BOARD JACKING" 13/8" 103

Articles in this issue

Links on this page

view archives of Alpine - Hardware Catalog Dec 2013