Issue link: http://alpine.uberflip.com/i/221331
ANCHOR DOWNS (Screw Type) ADST ADG SCREW TYPE ANCHOR DOWNS Design Features . . heavy gage load transfer plate reduces anchor down deflection . . improved connection using screws instead of bolts . . special screws have been tested and are included with ADST . . galvanized steel for corrosion resistance . . designed to easily fit on a 4x post . . flat base makes for easier installation . . ideal for retrofit applications. Heavy loaded anchor downs ADG, Anchor Down Screw Types, are tension products used to connect framing members to either concrete, using a suitable anchor bolt, or span between other framing members using threaded rods. For raised installation ADG anchor downs require a nut on both site of load transfer plate. The new ADG heavy duty anchor down combining high load capacity and minimizes deflection under load. With the use of a unique load transfer plate which is formed and pressed into the body of the anchor down creating a one piece structural unit. ADG 8-SDS3 ADG12-SDS3 ADG15-SDS3 8KIPS 10KIPS 15KIPS 2⁵⁄₈" ADST H ADC C L ⁵⁄₈" 25/8 " Anchor bolt nuts should be finger tight plus 1/2 to 1/3 turn with a wrench as stated by ASTM test standards for anchor bolts. 78 SUPERSPEED Drive Screws Used With This Product 3" ADG H ADG12 (Others Similar) C L ³⁄₄" ANCHOR DOWN CONCENTRIC Design Features . . offer the builder a new style anchor down concentric to eliminate bending on the stud. Easier and faster to install using SUPERSPEED Drive Screws which are included with the product and not the old style bolts which are not included and are labor intensive sometimes missed sized or ordered wrong. 1. Easier Installation 2. High design Loads 3. Lower cost of installing product Material . . 10 ga. galvanized steel (strap and base) ³⁄v" steel washer (slotted ³⁄," for adjustment) Sizes . . for 2-2X, 4X and 2-2 x 6 members. (Members must be installed centered for use as post) Loads . . ADC Anchor Down Concentric has two design load capacities which have been increased by 33Z⁄c% of seismic applications. Special . . ADC Anchor Down Concentric can be used with product line of SUPERSPEED anchor bolts. ADST6 (Others Similar) Material . .12 ga. galvanized steel . . ADST 7 ga. galvanized steel . . ADG C⁄," x 2Z⁄x" x 2Z⁄x" sq. washer hot dipped galvanized . . ADG15 Finish . . Galvanized steel Special . . the ADG10-SDS3 anchor down can be used with the KCAB36 anchor bolt. SUPERSPEED Drive Screws are best installed with a low speed, or variable speed. Z⁄x" drill and a C⁄," hex head driver. Loads . . design loads are based on capacity of special screws ( SUPERSPEED Drive Screws) Z⁄v" x 3 inch of 500 pounds each @ 133% duration. Nails or lag screws cannot be substituted and achieve the listed design loads. Special . . SUPERSPEED Drive Screws are furnished with the ADG Anchor Down for SUPERSPEED labor saving installation. Anchor bolt nuts should be finger tight plus 1/2 to 1/3 turn with a wrench as stated by ASTM test standards for anchor bolts. 2⁵⁄₈" SUPERSPEED Drive Screws Used With This Product ADC B W H ADC 10/22 – SDS2 (Others Similar) C L KC Inspection Hole Load Transfer Plate