FLOOR APPLICATIONS
LVL BEAMS
OR DIMENSIONAL LUMBER
SUPPORTING
BEAM
THA
HANGER
SPACEJOIST TE
3/4" SHEATHING MAY BE REQUIRED
FOR ADDITIONAL REINFORCEMENT.
FACE
MOUNT
HANGER
TOP MOUNT HANGER
NOTE: IF SIDES OF HANGER DO NOT LATERALLY
SUPPORT TOP CHORD, A WEB STIFFENER IS REQUIRED.
MULTIPLE TRUSS CONNECTION SHALL BE ACCOMPLISHED
USING SIMPSON SCREW CONNECTION.
Stair Opening - Detail H
Flush Beam - Detail I
2x_ BEARING PLATE FLUSH
WITH INSIDE FACE OF
WALL OR BEAM.
NOTCH IN WALL
Flush Wall - Detail J
Fire Cut - Detail K
LOAD TRANSFER
(3) 8D (2-1/2") BOX NAILS, CLINCHED
Gap 1/8"
minimum
TIGHT FIT
SIMPSON SCREW CONNECTION
OR EQUIVALENT. SEE SIMPSON STRONGTIE™ LITERATURE FOR DESIGN VALUES.
Two-Ply Truss Connection - Detail L
23/32 X 3-1/2" WEB STIFFENER EACH SIDE OF TRUSS
Web Stiffener - Detail M
TRIM A MAXIMUM OF 12" FROM EACH END.
RIM
BOARD
DRIVE NAILS AT AN ANGLE TO MINIMIZE
SPLITTING OF BOTTOM CHORD.
ONE (1) 8d TOE NAIL EACH SIDE
OF SPACEJOIST TE AT 1-1/2"
MINIMUM FROM END.
End Nailing - Detail N
BOTTOM
THERE IS A TOP AND BOTTOM TO
SPACEJOIST TE TRUSSES. SEE STAMP
ON JOIST BEFORE ERECTING.
Trimmable End Length - Detail O
7
