Issue link: http://alpine.uberflip.com/i/1399321
46 ALS 4.0 XE P R O D U C T M A N U A L EN Figure 115 Step 7 – Select "Execute L1 Calibration". This button is shown in Figure 115 and Figure 116. Figure 116 The following message (Figure 117) should appear. Figure 117 Step 8 – Repeat for axis L2. Step 9 – Select "Exit". Step 4 – To calibrate L1/L2, select "Controller" from the task bar at the bottom of the screen (Figure 112). Figure 112 The screen in Figure 113 will appear: Figure 113 Step 5 – Select the "Calibrate L1 & L2 & L1P Lengths" button (circled on Figure 113 and shown in Figure 114). Figure 114 Step 6 – Enter the commanded distance (the length input) and the actual measured distance using the box shown in Figure 115.