Issue link: http://alpine.uberflip.com/i/126813
LS STRAPS Design Features . . manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members. LS Straps are 11/4" wide and available in lengths from 95/8" to 395/8". Three holes are located at 3/4" on center, in a diagonal pattern, at each end of the strap. Remaining holes are punched at 11/2" on center, in a diagonal pattern. At mid length of each strap is a 3" long section with no holes. 24.625 = LS24 21.625 = LS21 18.625 = LS18 15.625 = LS15 12.625 = LS12 9.625 = LS9 1 14 Material . . manufactured from mill certified steel coil manufactured to ASTM A653 SS Grade 40 or better, 20 gauge with G90 coating, with a minimum uncoated thickness of steel = 0.0329 in. and Fu = 55 ksi. MS " 3 8 " 3 8 1 12 " " " 3 8 3" LS SERIES STRAPS Design Features . . manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members. MS Straps are 11/4" wide and available in lengths from 95/8" to 395/8". Three holes are located at 3/4" on center, in a diagonal pattern, at each end of the strap. Remaining holes are punched at 11/2" on center, in a diagonal pattern. At mid length of each strap is a 3" long section with no holes. Material . . manufactured from mill certified steel coil manufactured to ASTM A653 SS Grade 50 Class 1 or better, 16 gauge with G90 coating, with a minimum uncoated thickness of steel = 0.0538 in. Fy = 55 ksi and Fu = 65 ksi. 91a 3 8 " www.itwbcghardware.com - 800.521.9790 39.625 = MS39 36.625 = MS36 33.625 = MS33 30.625 = MS30 27.625 = MS27 24.625 = MS24 21.625 = MS21 3 8 1 14 " 1 12 " " 3 8 " 3" MS SERIES ITW BCG Hardware