Issue link: http://alpine.uberflip.com/i/126813
March 2013 SUPERSPEED SHEAR WALLS For Product Substitutions . . . the ONLY APPROVED EQUAL™ PRODUCT HEIGHT DIA NUMBER OF BOLTS CODE (INCHES) (INCHES) IN TOP OF WALL FASTENER SCHEDULE DESIGN ANCHOR BOLTS CENTER LINE SUPERSPEED LOAD (LBS) DIAMETER (INCHES) DIMENSIONS SDS ¹⁄₄ x 3 DRIVE SCREWS DEFLECTION OF DESIGN LOAD (INCHES) DEFLECTION OF DESIGN LOAD (INCHES) DEFLECTION OF DESIGN LOAD (INCHES) SSW 7 78 7 GA 2 – ⁷⁄₈ MB 12 1¹⁄₂ 60 15560 .070 .073 .080 SSW 8 93¹⁄₄ 7 GA 2 – ⁷⁄₈ MB 16 1¹⁄₂ 60 15560 .070 .073 SSW .080 SSW 9 105¹⁄₄ 7 GA 2 – ⁷⁄₈ MB 20 1¹⁄₂ 60 15560 .0700 .073 .080 SSW 10 117¹⁄₄ 7 GA 2 – ⁷⁄₈ MB 24 1¹⁄₂ 60 15560 .070 .073 .080 SSW 12 141¹⁄₄ 7 GA 2 – ⁷⁄₈ MB 26 1¹⁄₂ 60 15560 .070 .073 .080 SUPERSPEED Scre Drive Screws Used With This Product W Installation 3 Installation 4 Using variable speed drill, install "SSW" Shear Wall standards to wood framing posts with provided SUPERSPEED SDS 1/4 x 3 drive screws. Install screws using a ¹⁄₂" drive variable speed drill, 5.5 amps or larger and a ³⁄₈" hex head driver. Install SSW Shear Wall with attached posts along with regular framing. Square walls and nail shear panels prior to tightening anchor bolt nuts. Note: Install standards on each side of shear wall. Bolt through top plates with 7/8" diameter machine bolt and 2-BW 7/8 plate washer. BW1 (⁵⁄₁₆" x 3¹⁄₂" x 3¹⁄₂") Installation 5 Install siding and/or plywood and nail as specified. Note: Frame shear wall with minimum 1 - 4 x 4 against each standard. ITW BCG Hardware Installation 6 Anchor bolt nuts should be finger tight. With a wrench, tighten anchor bolt nuts 1/3 - 1/2 turn after nut contacts with KCMP "SSW" as stated by ASTH test standards for anchor bolts. Consider possible wood shrinkage. www.itwbcghardware.com - 800.521.9790 85