Alpine

ANCHORS AND CLIPS (Wood-To-Wood) FA3 FA6 FAL FALW FRAMING ANCHORS Design Features . . FA6 anchors provide the builder with the industry's most versatile framing anchor including: and 3-way anchoring ties on the job. FA3 anchors have been designed especially for use on 2 x 4, 2 x 3 and 3 x 4 framing. Material . . 18 and 20 ga. galvanized steel. Loads . . (shown with directional arrow) are normal with 25% increase for maximum, and are based on laboratory tests. Special . . the FAL and FAL5 anchor provides a plate to transfer the shear force to the blocking connection or rim joist from the top plate. The improved nail pattern helps prevent splitting of the wood members for both single/double top plate situations. FAL 3 " Bendline 5 " 4 " FA3 FALW FA6 4 " 3 " The FALW Lateral Wall Framing Clip is designed with locator bending slots to aid proper installation to transfer shear loads between the top wall plates and the roof diaphram. The FALW can be used on wood or masonry walls the roof pitches can be adjusted from 1:12 to 12:12. 5 " FAL5 CA CAS CLIP ANCHORS/SKEWED Design Features . . CA versatile reinforcing angles for a multi-purpose anchor around the job. These are generically known as TECO™ clips. They can be nailed to concrete slabs to hold posts or studs, or for high uplift conditions. Holes are staggered to eliminate wood splitting and to permit installation on both sides of the timber. The CAS is a clip anchor that can be field skewable from 0° to 135°. (Holes are slotted) Lengths . . CA, CAS – 2¹⁄₂", 4¹⁄₂", 6¹⁄₂" and 8¹⁄₂". Material . . 18 ga. galvanized steel. A B A B CAS90 2 " CA30 4 " CAS70 CA50 8" 6 " CAS50 TOP VIEW CA70 6 " 8 " 5" CAS30 CA90 3 " CAS Top View 64 www.itwbcghardware.com - 800.521.9790 CAS CA ITW BCG Hardware

• Cover