Alpine

ITW BCG Hardware Catalog

Issue link: http://alpine.uberflip.com/i/126813

Contents of this Issue

Navigation

Page 65 of 123

POST ANCHORS HEAVY ANCHORS HA Design Features . . accommodate heavy column HAQ bases and rough-sawn posts, glu-lam timbers or heavy-duty fence construction where high structural values and durable performance are part of the specifications. Anchors should be set in position before pouring concrete. Erection nail holes are provided to speed up installation. These anchors are now available in width of 7¹⁄₈" for use with LVL and PSL engineered wood products. Material . . HA44 through HA612, ³⁄₁₆" steel; HA7 through HA1212, ¹⁄₄" steel. HAQ, 7 ga. galvanized steel. Values have 33¹⁄₃% seismic increase included in the design loads. Moisture Barrier Material . . HA44 through HA9, 7 ga. steel. Larger sizes have ¹⁄₄" moisture bearing. Finish . . SUPERSPEED gray paint. Special Finish . . HA44, HA46 and HA66 galvanized steel. Ordering/Specifying Information . . to specify screw type use "Q" after regular stock number of HA. Example: HA44 now is HAQ44. SUPERSPEED Drive Screws (SDS ¹⁄₄ x 2) wood screws (12) included with product. SUPERSPEED Drive Screws Used With This Product HA HAQ44 HAS HEAVY ANCHORS/STAND-OFF Features . . the HAS HASQ Designto the HA heavy anchorpost anchor is very similar (above) except that it is used where a situation or application is needed for sanitation and moisture conditions. This anchor provides the builder with a medium-duty and low cost post anchor that can be embedded into concrete up to 7". The HAS also features a moisture-barrier plate that is four-sided. The standoff plate is located 1" in height above concrete floors or decks when set in concrete. UBC requires an off-the-concrete post anchor when they are supporting permanent structures which are exposed to the weather. Material . . 12 ga. galvanized steel base and 10 ga. galvanized steel strap. Special . . the HAS reduces the potential for decay at post and column ends. Ordering/Specifying Information . . to specify screw type use "Q" after regular stock number of HAS. Example: HAS44 now is HASQ44. SUPERSPEED Drive Screws (SDS ¹⁄₄ x 2) wood screws (14) included with product. PA SUPERSPEED Drive Screws Used With This Product HAS HASQ44 POST ANCHORS Design Features . . when placed into wet concrete (after screeding), these post base anchors provide both lateral and uplift resistance – they will not pull out due to offset legs. Pointed ends provide for fast, easy setting and alignment. They also eliminate the need for bolts or other inserts. The seat is flush-mounted to the concrete. The post anchors are also available in rough post sizes. Material . . 12 ga. galvanized steel. PA44 PAS POST ANCHORS/STAND-OFF Design Features . . the PAS44 is very similar to the HAS heavy anchor stand-off (above) except that it can be embedded into concrete slabs, floor or deck to 4x = 3¹⁄₂ 6x = 5". The PAS has the same moisture-barrier feature and provides a 1" stand-off plate height. Material . . 12 ga. galvanized steel base and 12 ga. galvanized steel strap. Installation . . use 14-16d nails for full load values. For 4x post size, use 2-¹⁄₂" x 4¹⁄₂" MB; for 6x post size, use 2-¹⁄₂" x 6¹⁄₂" MB. Special . . economical price and ease-of-use make these ideal post anchors for the do-it-yourself market. 60 www.itwbcghardware.com - 800.521.9790 PAS44 ITW BCG Hardware

Articles in this issue

view archives of Alpine - ITW BCG Hardware Catalog