Alpine

MC HH MULLION CLIPS/HEADER HANGERS Design Features . . offers greater economy in installing door and window headers with faster, more accurate installation that strengthens the frame and eliminates toe-nailing and the need for cripples. HH hangers can also be used for other cross-member detail applications. In addition, design features provide dimensional accuracy for metal support of vertical or lateral loads at the window sill member and at the post or mullion member. Dimensional accuracy is also provided for fast, accurate framing for fence construction and other framing applications. For added strength, clip nails are in three dimensions. Material . . 18 ga. galvanized steal. TCB HH4 TRUSS CLIP BASES Design Features . . comes in two sizes which will work with any quantity of girder plys. The truss or girder load is transferred by the TCB to the plate for conditions with limited bearing. An added benefit is extra uplift provided. The TCB replaces the lower load-transfer systems. Material . . 18 ga. galvanized steel. Installation . . the TCBs must be installed in pairs. TCB4 (TCB6 Similar) SPT SPTH SPTR SPTS SPTD STUD PLATE TIES 1 " TCB6 Two TCB Bases Installed with a Two-Ply Girder Truss SPTS Design Features . . SPTs are used for wind resistance or seismic conditions. The Stud Plate Ties fasten the bottom plate or the top plate (double plate) to the studs. Material . . SPTH18 ga. galvanized steel. All other parts 20 ga. galvanized steel. Installation . . use all specified fasteners. Nails must be installed into the plate before the stud. SPT4, SPT6 and SPT8 wrap completely around the double top plates. SPTR (Stud Plate Tie Reversible) has locating lines which aid in placement on single bottom plate or double top plate conditions. W SPT4/6/8 SPTH4/6/8 (Over Top Plates) 6 " H SPT1 2 " SPTD (SPT2 Similar) 1 " SPT5 (SPT3 Similar) SPT4/6/8 SPTH4/6/8 (Under Bottom Plates) 56 www.itwbcghardware.com - 800.521.9790 ITW BCG Hardware

• Cover