Alpine

SKEWED OR SLOPED JOIST HANGERS S H HTF March 2013 STANDARD JOIST HANGERS (Pages 8 and 38) HEAVY JOIST HANGERS (Pages 16 and 38) HEAVY TOP FLANGE JOIST HANGERS (Page 18) Design Features . . skewed hangers, sloped hangers and combination skewed and sloped hangers are also manufactured from 1-piece prime galvanized steel (no welded parts). LOAD DIRECTION VARIATION Down Skewed 100 Down Sloped 100 Down Combination 80 *Skewed Specify Degrees Sloped Up or Sloped Down (30° Maximum) % OF DESIGN LOAD 75 Uplift H210 H210 Sloped Up/Sloped Down (1-Piece Design) Skewed Left – Sloped Down (1-Piece Formed Design) No Welds *Greater than 15% R RA RH RHG ROOF HANGERS (Pages 22 and 23) ROOF ANGLED HANGERS (Pages 22 and 23) ROOF HEAVY HANGERS (Pages 22 and 23) ROOF HEAVY GLU-LAM HANGERS (Pages 22 and 23) Design Features . . the normal manufacturing technique for custom or modified R series hangers is a 3-piece welded design. The seat is welded to the two side flanges. Load Direction Variation RA412 Skewed Down % of Design Load 100 Skewed Right (Welded) Down Sloped 100 Down Combination 100 Down Offset Ridge 100 RA412 Skewed Left – Sloped Down (1-Piece "U" Strap Design Welded to Top Flange Angle) 50 Down RA412 Sloped Down (Welded) IMPORTANT KC® Metal Products, Inc. can also provide 1-piece hangers for skewed, sloped and skewed and sloped combination hangers when appearance is important in exposed project construction. RS RSO RSH RSG RSGH ROOF STRUCTURE RS412 (Pages 20 and 21) 4X Nailer on I-Beam ROOF STRUCTURE OREGON (UPLIFT) (Pages 20 and 21) ROOF STRUCTURE HEAVY (Pages 20 and 21) ROOF STRUCTURE GLU-LAM (Pages 20 and 21) ROOF STRUCTURE (Pages 20 and 21) Design Features . . the RS series hangers can only be sloped. For the skewed series, see the above R series. Material . . 1-piece galvanized or prime quality steel. LOAD DIRECTION VARIATION % OF DESIGN LOAD Down Sloped 1° to 30° 100 Down Sloped 31° to 45° 80 ITW BCG Hardware RS412 RS412 Sloped Down (1-Piece Design) Sloped Down We can manufacture almost any type of hanger for your needs. Just simply state: (1) the type of hanger Example: Heavy (H). (2) the size of the hanger Example: 4 x 12 (H412). (1) the modifications) that is needed Example: Modifications skewed (H412 skewed right 30°) Modifications sloped down ⁴⁄₁₂ pitch (H412 skewed right 30°, sloped down ⁴⁄₁₂ pitch). For additional modified hanger types, ask for our Technical Manual. www.itwbcghardware.com - 800.521.9790 45

• Cover