Issue link: http://alpine.uberflip.com/i/126813
TRUSS HARDWARE LIGHT HIP/JACK TRUSS HANGERS TOP VIEW Design Features . . a hip/jack connection which is a single, non-welded formation for use with a lighter-loaded double girder truss. Specify left or right. Material . . 18 ga. galvanized steel. Special . . features of the LHJT include: HEADER HI P member. Installation . . use all specified fasteners JACK LHJT required nail penetration. together to act as a single unit. L= Left R = Right LHJTR LHJT(L) Hip Skewed 45° Right LMTH LIGHT MULTIPLE TRUSS HANGERS Design Features . . a single-piece connector designed to carry multiple truss members off girder trusses with 2x4 or 2x6 bottom chords. Material . . 16 ga. galvanized steel. Installation . . use all specified fasteners distributed about the centerline to avoid eccentric loading of the connector. bottom chords. with 2x6 bottom chords. LMTH MHJT MEDIUM HIP/JACK TRUSS HANGERS Design Features . . a hip/jack connection which is a single, non-welded formation for use with a heavier-loaded double girder truss. Material . . 14 ga. galvanized steel. Special . . features of the MHJT include: member. MHJT is for either right or left. No hanger mix-ups Installation . . use all specified fasteners required nail penetration. MHJT MMTH/MMTH-2 together to act as a single unit. Typical Installation for MHJT/MMTH/MMTH-2 Working Point MULTIPLE MEDIUM TRUSS MMTH MMTH-2 HANGERS Top View Left terminal hip without center common jack Design Features . . a multiple truss connection which is a single, non-welded formation for use with medium to high load capacity hangers. Material . . 12 ga. galvanized steel. Installation . . all multiple members must be fastened together to act as a single unit. ³⁄₄" Typ Working Point ³⁄₄" Typ member and 20% to the jack for terminal installation. Top View Left hand hip installation Top View Right hand hip installation member and 25% to the jack for left or righthand hip installation. ¹⁄₂" nails with 0.67 of the design loads. attach to a double girder truss. 24 www.itwbcghardware.com - 800.521.9790 Working Point ³⁄₄" Typ Working Point Top View Terminal type installation (three member connection) ITW BCG Hardware